MSI MS-9249, User Manual

Page: 33 / 86

2-5
Hardware Setup
Installing DDR Modules
1. The DDR DIMM has only one notch on the center of module. The module
will only fit in the right orientation.
2. Insert the DIMM memory module vertically into the DIMM slot. Then
push it in until the golden finger on the memory module is deeply inserted
in the socket.
3. The plastic clip at each side of the DIMM slot will automatically close.
Volt Notch
DIMM1 DIMM2 DIMM3 DIMM4 Total Memory
128MB~1GB 128MB~1GB
128MB~1GB 128MB~1GB
128MB~1GB 128MB~1GB
128MB~1GB 128MB~1GB
128MB~1GB 128MB~1GB 256MB~2GB
128MB~1GB 128MB~1GB 256MB~2GB
128MB~1GB 128MB~1GB 256MB~2GB
128MB~1GB 128MB~1GB 256MB~2GB
128MB~1GB 128MB~1GB 256MB~2GB
128MB~1GB 128MB~1GB 256MB~2GB
128MB~1GB 128MB~1GB 128MB~1GB 384MB~3GB
128MB~1GB 128MB~1GB 128MB~1GB 384MB~3GB
128MB~1GB 128MB~1GB 128MB~1GB 384MB~3GB
128MB~1GB 128MB~1GB 128MB~1GB 384MB~3GB
128MB~1GB 128MB~1GB 128MB~1GB 128MB~1GB 512MB~4GB
MSI Reminds You...
You can barely see the golden finger if the module is properly
inserted in the socket.