MSI MS-9232 User Manual Download Page 84 | Manualshive

Page: 84 / 87

MSI MS-9232 User Manual Download Page 84

A-20

MS-9232 Server

(4) Specify Volume Size

Specify the amount of available array space to be used by the new RAID volume. You
may enter the amount in the space or use the slider to specify. It is recommended you
use 100% of the available space for the optimized usage. For RAID 0 volume, if you
do not specify 100% of the hard drive space, the rest hard drive space will be
worked as RAID 1 volume, which is the new technology called Intel Matrix RAID. Then
click

Next

to continue.

(5) Start Creating RAID Volume from Existing Hard Drive Wizard

Before you continue the procedure of RAID volume creation from existing hard drive,
read the dialogue box below carefully. Please note that once you click

Finish

, the

existing data on the selected hard drive(s) will be deleted permanently and this
operation cannot be undone. It is critical that you backup all important data before
selecting

Finish

to start the migration process.

9232v1.0-Appendix A( ICH7R SATA RAID).P65

2006/11/7,

下午

05:19

20

«
...
82
83
84
85
86
...
»

Summary of Contents for MS-9232
























































































Reviews:

No comments