3-15
BIOS Setup
Parallel Port Configuration
Press <Enter> to enter the sub-menu.
Parallel Port
This item is used to enable/disable the parallel port.
Device Settings
This item shows the current setting. (read only)
Change Settings
Select an address and corresponding interrupt for the parallel port.
Device Mode
This item allows you to select the parallel port mode.
Power Management setup
Press <Enter> to enter the sub-menu.
Restore on AC Power Loss
This item specifies whether your system will reboot after a power failure or
interrupt occurs.
H/W Monitor
Press <Enter> to enter the sub-menu.
Chassis Intrusion
The field enables or disables the feature of recording the chassis intrusion
status and issuing a warning message if the chassis is once opened. To clear
the warning message, set the field to [Reset]. The setting of the field will auto-
matically return to [Enabled] later.
CPU Smart Fan Targer
The mainboard provides the Smart Fan function which can control the CPU fan
speed automatically depending on the current temperature to keep it with in a
specific range. You can select a fan target value here. If the current CPU fan
temperature reaches to the target value, the smart fan function will be activated.
It provides several sections to speed up for cooling down automaticlly .
SYS Fan Control
This field allows you to control the speed of the system fan.
PC Health Status
CPU/ System Temperature, CPU FAN/ System FAN1 Speed, CPU
Vcore, 3.3V, 5V, 12V, 5V SB
These items display the current status of all of the monitored hardware
devices/components such as CPU voltage, temperatures and all fans
’
speeds.
7395v1.0-3_BIOS_EFINITY.p65
2007/12/13,
下午
02:02
15