B-7
nVidia RAID
Installing the RAID Driver (for bootable RAID Array)
1. After you complete the RAID BIOS setup, boot from the W indows CD, and the
W indows Setup program starts.
2. Press
F6
and wait for the W indows Setup screen to appear.
3. Specify the NVIDIA drivers:
(1) Insert the floppy that has the RAID driver, press S, then press Enter. The
W indows Setup screen appears as below:
(2) Select
“
NVIDIA RAID CLASS DRIVER
”
and then press
Enter
.
(3) Press
S
again at the Specify Devices screen, then press
Enter.
(4) Select
“
NVIDIA NForce Storage Controller
”
and then press
Enter.
The follow-
ing W indows Setup screen appears listing both drivers:
Important
Please follow the instruction below to make an nVIDIA Serial ATA RAID driver
for yourself.
1. Insert the MSI CD into the CD-ROM drive.
2. Click the
“
Browse CD
”
on the Setup screen.
3. Copy all the contents in the
:\\nVidia \System \M CP55 \IDE \Win
XP\sataraid
to a formatted floppy disk.
4. The driver disk for nVIDIA RAID controller is done.
