MSI MS-7176, User Manual, Page: 111 / 152

Introduction to VIA VT6410 IDE RAID
6 - 5
Create Disk Array
Use the up and down arrow keys to select the Create Array command and
press <Enter>.
MSI Reminds You...
The
“
Channel
”
,
“
Drive Name
”
,
“
Mode
”
and
“
Size (GB)
”
in the following
example might be different from your system.
Select Array Mode and press <Enter>, a list of array modes will appear.
Highlight the target array mode that you want to create, and press <Enter> to confirm
the selection. If RAID 1 or RAID 0/1 is selected, an option list will popup and enable the
users to select Create only or Create and duplicate . Create only will allow BIOS
to only create an array. The data on the mirroring drive may be different from the
source drive. Create and duplicate lets BIOS copy the data from the source to the
mirroring drive.