MSI MS-7028, User Manual, Page: 42 / 114

E-3-7
BIOS Setup
Onboard Audio Controller
This item is used to enable or disable the onboard Azalia (Audio Codec) controller.
Selecting [Enabled] allows the mainboard to enable the onboard Azalia controller.
Disable the function if you want to use other controller cards to connect an audio
device. Settings: [Disabled] and [Enabled]
.
IDE Devices Configuration
Press <Enter> to enter the sub-menu and the following screen appears:
PCI IDE BusMaster
Set this option to [Enabled] to specify that the IDE controller on the PCI local bus has
bus mastering capability. Settings options: [Disabled], [Enabled].
I/O Devices Configuration
Press <Enter> to enter the sub-menu and the following screen appears:
OnBoard Floppy Controller
Select [Enabled] if your system has a floppy disk controller (FDC) installed on the
system board and you wish to use it.
COM Port 1
This item specifies the base I/O port addresses of the onboard Serial Port 1 (COM 1).
Selecting [Auto] allows AMIBIOS to automatically determine the correct base I/O port
address. Settings: [3F8/IRQ4], [2F8/IRQ3], [3E8/IRQ4], [2E8/IRQ3] and [Disabled].
Parallel Port
This field specifies the base I/O port address of the onboard parallel port. Selecting
[Auto] allows AMIBIOS to automatically determine the correct base I/O port address.
Settings: [378], [278], [3BC] and [Disabled].
Parallel Port Mode
This item selects the operation mode for the onboard parallel port: [ECP], [Normal] or
[Bi-Dir].
Option Description
[Enabled] Enables the onboard Floppy controller.
[Disabled] Disables the onboard Floppy controller.