3-24
MS-6742 ATX Mainboard
Set Super I/O
Press <Enter> to enter the sub-menu and the following screen appears:
OnBoard FDC
Select Enabled if your system has a floppy disk controller (FDD) installed
on the system board and you wish to use it.
Onboard Serial Port A/B
These items specify the base I/O port addresses of the onboard Serial
Port 1 (COM A)/Serial Port 2 (COM B). Selecting
Auto
allows AMIBIOS
to automatically determine the correct base I/O port address. Settings:
Auto, 3F8/COM1
,
2F8/COM2
,
3E8/COM3
,
2E8/COM4
and
Disabled
.
Onboard Parallel Port
This field specifies the base I/O port address of the onboard parallel port.
Selecting
Auto
allows AMIBIOS to automatically determine the correct
base I/O port address. Settings:
Auto, 378
,
278
,
3BC
and
Disabled
.
Parallel Port Mode
This item selects the operation mode for the onboard parallel port:
ECP
,
Normal
,
Bi-Dir
or
EPP
.
EPP Version
The item selects the EPP version used by the parallel port if the port
is set to
EPP
mode. Settings:
1.7
and
1.9
.
Option
Description
Auto
BIOS will automatically determine whether to enable the
onboard Floppy controller or not.
Enabled
Enables the onboard Floppy controller.
Disabled
Disables the onboard Floppy controller.