3-9
BIOS Setup
HDD-1
The system will boot from the second HDD.
HDD-2
The system will boot from the third HDD.
HDD-3
The system will boot from the fourth HDD.
ZIP
The system will boot from ATAPI ZIP drive.
LAN
The system will boot from the Network drive.
USB-FDD
The system will boot from the USB-interfaced
floppy drive.
USB-ZIP
The system will boot from the USB-interfaced
ZIP drive.
USB-CDROM
The system will boot from the USB-interfaced
CD-ROM.
USB-HDD
The system will boot from the USB-interfaced
HDD..
Disabled
Disable this sequence.
Boot Other Device
Setting the option to
Enabled
allows the system to try to boot from other
device if the system fails to boot from the 1st/2nd/3rd boot device.
Swap Floppy
Setting to
Enabled
will swap floppy drives A: and B:.
Seek Floppy
Setting to
Enabled
will make BIOS seek floppy drive A: before booting the
system. Settings:
Disabled
,
Enabled
.
Boot Up Num-Lock Status
This setting is to set the Num Lock status when the system is powered on.
Setting to
On
will turn on the Num Lock key when the system is powered on.
Setting to
Off
will allow users to use the arrow keys on the numeric keypad.
Setting options:
On
,
Off
.
MSI Reminds You...
Available settings for “1st/2nd/3rd Boot Device” vary depend-
ing on the bootable devices you have installed. For example, if
you did not install a floppy drive, the setting “Floppy” does not
show up.