Chapter 2
2-6
Installing DDR Modules
1.
The DDR DIMM has only one notch on the center of module. The module
will only fit in the right orientation.
2.
Insert the DIMM memory module vertically into the DIMM slot. Then
push it in until the golden finger on the memory module is deeply inserted
in the socket.
3.
The plastic clip at each side of the DIMM slot will automatically close.
TIP: You can barely see the golden finger if the module is properly
inserted in the socket.
Volt
notch
DIMM Modules Combination
At least one DIMM module should be installed on the motherboard.
You can install memory modules in any combination as follows:
Warning:
We dont recommend to install DOUBLE-SIDED
DDR266 module on DDR 3 slot
because it will cause all memory
modules to slower down and run at 200MHz.
Slot
Momory Module
Total Memory
Slot 1
64MB, 128MB, 256MB,
64MB~512MB
(Bank 0 & 1) 512MB
Slot 2
64MB, 128MB, 256MB,
64MB~512MB
(Bank 2 & 3) 512MB
Maximum System Memory Supported
64MB~1GB
All manuals and user guides at all-guides.com
