MSI MS-6117, User Manual, Page: 26 / 88

CHAPTER 2 HARDWARE INSTALLATION
2-20
A. How to install a DIMM Module
1. The DIMM slot has a two Notch Key “VOLT and DRAM”, so the
DIMM memory module can only fit in one direction.
2. Insert the DIMM memory module vertically into the DIMM slot.
Then push it in.
3. Close the plastic clip at the side of the DIMM slot.
Single Sided DIMM
Double Sided DIMM
Note: You can only use a 3.3 volt DIMM module (EDO or SDRAM).
VOLT DRAM
2.4-2 Memory Installation Procedures