2-2
Slide the CPU Heat Sink and Fan assembly over the CPU
!! Be sure that there are
no wires underneath the Heat Sink !!
2-3
a.b.c.d. Align the four screws with the screw holes next to the CPU. May need to
slide the Heat Sink to the side to align. Tighten the four screws in a diagonal
direction.
!! Improper connection of the CPU heat sink will damage the notebook
and CPU !!
2-4
Plug the CPU fan connector before positioning the fan.
!! Connect the wires
correctly. There is only one way to connect. DO NOT force in !! Warning: failure to
connect the fan may cause damage to the notebook and CPU !!
Step 1 : Installing CPU
1-1
Prepare a proper size flat head screw driver. Un-screw the screw until it can not
go any further
1-2
Locate the golden cut edge on the CPU’s upper right-hand corner. Then insert the
CPU into the socket.
!! The CPU will only fit in the coorect orientation !!
1-3
Adjust the CPU socket by turning the screw. Make sure the CPU is properly
installed. Then press the CPU evenly by hand and turn the screw using a flat head
screw driver to lock the CPU in place.
!! Please make sure the golden cut edge
location is aligned with the notch of the CPU socket. If the CPU does not align with
the CPU socket, it will damage the CPU !!
Step 2 : Installing CPU Heat Sink and Fan
2-1
Use the Heat Sink and Fan that is provided
p. 3
p. 4
a.
b.
c.
d.
