10
Software Installation
This chapter describes the procedures of installing the
driver and utility. Follow the instruction step by step to
finish the installation. If you use W indows
®
98SE/ME,
please prepare the W indows
®
Setup CD at hand before
installing the driver; because the system will ask you to
insert the Setup CD to copy files during the installation.
Please
NOTE
that the MN54G should be installed into your
computer before installing the driver and utility. Then, the
operating system will detect a new device and start to
configure the new device. Click
Cancel
here to start instal-
lation from the InstallShield W izard.
Click
Tip:
The wireless LAN adapter
should be installed into your
PC before installing the driver
and utility.
Your Wireless LAN adapter type
Insert the software CD into your CD-ROM drive, and the
Setup program should launch automatically.
If the Autorun program doesn
’
t launch automatically, click
Start
at the taskbar and select
Run...
. Type
E:\setup.exe
(where
E
is your CD-drive) in the Open box and click
OK
to
launch the Setup program manually.
The main screen of Setup program will appear as below.
Click the
Install Software
button.
Step 1.
