MSI MEGA MPC - MEGA - mPC 945 User Manual Download Page 5

Page: 5 / 84

C AUT ION:

D anger of explos ion if battery is inc orrec tly replac ed.

R eplace only with the same or equivalent type recommended by the

manufacturer.

Warning:

1. For every changes in powercord

ˇ¦

s usage, please use an approved power

cord with condition greater or equal to H05VV-F,3G , 0.75mm

2. Internal part is hazardous moving parts, please keep fingers and other

body parts away.

3. For pluggable equipment, the socket-outlet shall be installed near the

equipment and shall be easily accessible.

4. Do not disable the protective earth pin from the plug, the equipment must

be connected to an earthed mains socket-outlet.

Summary of Contents for MEGA MPC - MEGA - mPC 945





















































































Search results

Summary of Contents for MEGA MPC - MEGA - mPC 945

Reviews:

Related manuals for MEGA MPC - MEGA - mPC 945

Brands by name

Popular brands

MSI MEGA MPC - MEGA - mPC 945, User Manual

Search results

Summary of Contents for MEGA MPC - MEGA - mPC 945

Reviews:

Related manuals for MEGA MPC - MEGA - mPC 945

Brands by name

Popular brands