4-7
Setting BIOS Function
If you select
Manual
, related information is asked to be entered to the following
items. Enter the information directly from the keyboard. This information should
be provided in the documentation from your hard disk vendor or the system
manufacturer.
Access Mode
The settings are CHS, LBA, Large, Auto.
Capacity
The formatted size of the storage device.
Cylinder
Number of cylinders.
Head
Number of heads.
Precomp
Write precompensation.
Landing Zone
Cylinder location of the landing zone.
Sector
Number of sectors.
Drive A/B
This item allows you to set the type of floppy drives installed.
Video
The setting controls the type of video adapter used for the primary monitor of the
system. Available options are
EGA/VGA
.
Halt On
The setting determines whether the system will stop if an error is detected at boot.
Available options are:
All Errors
The system stops when any error is detected.
No Errors
The system doesn’t stop for any detected error.
All, But Keyboard
The system doesn’t stop for a keyboard error.
All, But Diskette
The system doesn’t stop for a disk error.
All, But Disk/Key
The system doesn’t stop for either a disk or a key
Summary of Contents for MEGA 180
Page 1: ...i User s Guide ...
Page 9: ...Introduction Introducing Your Digital Media Platform ...
Page 21: ...1 10 Chapter 1 ...
Page 132: ...6 18 Chapter 6 ...