manualshive.com logo in svg

MSI MAG Z490 TOMAHAWK, Quick Start Manual, Page: 13 / 76

Share
Download
MSI MAG Z490 TOMAHAWK Quick Start Manual Download Page 13

13

Contents

JRGB1~2: RGB LED connectors ........................................................................... 40
JRAINBOW1~2: Addressable RGB LED connectors ............................................ 41

Onboard LEDs ...................................................................................................... 42

EZ Debug LED ....................................................................................................... 42
LED_SW1: EZ LED Control ................................................................................... 42

Installing OS, Drivers & Utilities ......................................................................... 43

Installing Windows® 10 ......................................................................................... 43
Installing Drivers .................................................................................................. 43
Installing Utilities ................................................................................................. 43

UEFI BIOS ............................................................................................................. 44

BIOS Setup ............................................................................................................ 45
Entering BIOS Setup ............................................................................................. 45
Resetting BIOS ...................................................................................................... 46
Updating BIOS ....................................................................................................... 46
EZ Mode ................................................................................................................ 48
Advanced Mode  .................................................................................................... 52
SETTINGS Menu ................................................................................................... 53
OC Menu................................................................................................................ 55
M-FLASH Menu .................................................................................................... 59
OC PROFILE Menu ................................................................................................ 60
HARDWARE MONITOR Menu ............................................................................... 61

RAID Configuration .............................................................................................. 63

Enabling Intel® Rapid Storage Technology .......................................................... 63
Creating RAID Volume  ......................................................................................... 64
Removing a RAID Volume  .................................................................................... 65
Resetting Disks to Non-RAID ............................................................................... 66
Rebuilding RAID Array .......................................................................................... 67
Installing RAID Driver ........................................................................................... 68
Installing Intel® Rapid Storage Technology Software .......................................... 68

Intel® Optane™ Memory Configuration .............................................................. 69

System Requirements  ......................................................................................... 69
Installing the Intel® Optane™ memory ................................................................ 69
Removing the Intel® Optane™ memory................................................................ 71

Troubleshooting  ................................................................................................. 72

Summary of Contents for MAG Z490 TOMAHAWK













































































Reviews:

No comments