3-8
MS-9161 SSI Server Board
Multiprocessor Specification
This item allows you to configure the MP Specification revision level. Some operating
systems will require 1.1 for compatibility reason. Options: [1.4], [1.1].
Quick Boot Mode
This feature allows the system skip certain tests while booting. This will decrease the
time needed to boot the system. Options: [Enabled], [Disabled].
Case Open Function
The field enables or disables the feature of recording the chassis intrusion status and
issuing a warning message if the chassis is once opened. To clear the warning
message, set the field to Reset. The setting of the field will automatically return to
Enabled later. Settings: [Enabled], [Reset], [Disabled].
Chipset Configuration
The sub-menu is used to configure chipset features for optimal system performance.
Dram Bank Interleave
Interleave memory blocks across dram chip selects. Options: [Auto], [Disabled].
Node Memory Interleave
Interleave memory blocks across Processor Nodes. BIOS will AUTO detect the
capability of Memory System. Options: [Disabled], [AUTO].
F1 Help
↑↓
Select Item
-/+ Change Values F9 Setup Defaults
Esc Exit
↔
Select Menu
Enter Select Sub-Menu F10 Save and Exit
8
Setting items on this menu to incorrect values may cause
your system to malfunction.
Dram Bank Interleave :
[AUTO]
Node Memory Interleave :
[Disabled]
HPET Timer
[Enabled]
ECC :
[Enabled]
Dram ECC :
[Enabled]
DDR333/400 Volt Control:
[Disabled]
HT Link Frequency:
[400MHz]
ECC Scrub Redirection :
[Disabled]
Chip-Kill:
[Enabled]
DCACHE ECC Scrub CTL
[Disabled]
L2 ECC Scrub CTL
[Disabled]
Dram ECC Scrub CTL
[Disabled]
PhoenixBIOS Setup Utility
Interleave memory blocks
across dram chip selects.
BIOS will AUTO detect
capability on each Node.
Item Specific Help
Advanced
Chipset Configuration
Setup Warning
