MSI FT200 - MEGANET Free Talk, User Information

Page: 7 / 165

4
- With battery fully charged the talk time will be 5 to 6 hours
and the stand-by time will be about 200 hours.
Switch ON/OFF
1. Switch ON: press the on/off key for 2-3 seconds, you will see that
BL flashes fast for 1.5 seconds, then, keeps flashing slowly.
2. Standyby Mode: Headset switches to standby mode from link mode
automatically, to save the power. The BL flashes once in each 3
seconds
3. Switch OFF: press the on/off key for 2-3 seconds, you will see that
RL flashes fast for 1.5 seconds, then, both RL and BL are off.
Note:
- Do not press on/off key more than 7~8 seconds when
turning on the headset; otherwise, it may go into pairing
mode. If that happens, please short press the on/off key
and it will go into conversation status and then short press
on/off key again it will go into stand-by mode.
Pairing
Before using this headset, you have to pair it with a Bluetooth enabled
device. You pair the headset with the phone by adding it to the pairing
list in the phone. Then two devices will recognize each other when
they connect.
1. Ensure that your headset is powered off before initiating the pairing.
2. Press the on/off key for 7~8 seconds, you will see that the BL
flashes fast for 5 times, then off for 2 seconds, then BL on RL off
followed by BL off RL on continuously, indicating that the headset is
in its pairing mode.
3. Make sure the Bluetooth capability of mobile phones are turned on
to search and pair with this headset.(For the details, please refer to
the manual of your mobile phones.)
4. Your phone will find the headset and list "MSI FREE TALK FT200"
under "Found Device".
5. Select "MSI FREE TALK FT200" to begin the pairing.
6. Enter the PIN number "1234" and press confirm or yes key in your
mobile phone when asked to do so by your mobile phone.