3-10
MS-9621 CEB Server Board
available IRQs to use for HDD.
* New OS that supports switch to Native Mode (WinXP, Windows .NET
Server) can set SATA and PATA to Native Mode.
* Maximum 6 ATA devices to connect (4 for P-ATA & 2 for S-ATA).
SATA RAID Enable
This feature allows users to enable or disable the RAID function for each SATA hard
disk drive. Options: [Enabled], [Disabled].
Advanced Chipset Control
The sub-menu is used to configure chipset features for optimal system performance.
Integrated Device Control Sub-Menu
The sub-menu is used to configure the chipsets of integrated devices.
Legacy USB Support
Set to [Enabled] if you need to use any USB 1.1/2.0 device in the operating
system that does not support or have any USB 1.1/2.0 driver installed, such
as DOS and SCO Unix. Set to [Disabled] only if you want to use any USB
device other than the USB mouse. Setting options: [Enabled], [Disabled].
USB Controller 1/2
This setting is used to enable/disable the onboard USB controller. Setting
options: [Enabled], [Disabled].
USB 2.0 Controller
This setting is used to enable/disable the onboard USB 2.0 controller. Setting
options: [Enabled], [Disabled].
Advanced Chipset Control
8
Integrated Device Control Sub-Menu
8
PCI Device Option ROM Configuration
ECC Mode
[144-bit ECC]
Legacy USB Support:
[Enabled]
USB Controller 1 & 2:
[Enabled]
USB Controller 2:
[Enabled]
USB 2.0 Controller:
[Enabled]
Onboard 5721 LAN:
[Enabled]
Onboard SCSI 7901:
[Disabled]
Integrated Device Control Sub-Menu
