3-6
G
e
ttin
g
Sta
rted
Releasing the Battery Pack
It is always recommended to have another battery pack in reserve for enough power supply.
Please contact your local dealer to purchase a battery pack that is compliant to your notebook.
To remove the battery pack, following the
steps below:
1. Make sure the notebook is turned
off, and the AC power is
disconnected.
2. Press the lock/unlock button to the
unlocked position.
3. Locate the battery release button on
the bottom side.
4. Push and hold the release button to
the battery releasing direction as
shown on the bottom side.
5. Carefully slide the battery pack out
of the compartment and then pull
the battery pack out.
2
5
4
3
Summary of Contents for CR420
