Revision F 03/20/2017
MSI - A Division of Dixie Iron Works, Ltd. All rights reserved, patents pending.
Page 4
SECTION 3
2B
INSTALLATION
3.1
10B
Panel Assembly Installation
27B
The Panel Assembly should be mounted close to the Well Service Pump and such that the system control valve
is normally accessible. Mounting the Panel Assembly close to the pump will reduce the air hose pressure
replenishment times which help the system operate properly.
28B
The Panel Assembly is shipped with two ‘Z’ brackets connecting the reservoir through the panel mounting plate
tabs. The brackets and plate are fastened together with extra long ½”-13 bolts at four locations. Mount the
Panel Assembly using these bolts or with longer ½”-13 bolts if necessary. Do not install the reservoir separate
from the panel, the two are to remain joined in installed state.
ENCLOSURE MOUNTING PLATE
AND Z-MOUNTING BRACKETS
MUST REMAIN TOGETHER
