MSI 915G COMBO-FR - Motherboard - ATX, User Manual

Page: 42 / 115

E3-8
MS-7058 ATX Mainboard
PNP/PCI Configurations
This section describes configuring the PCI bus system and PnP (Plug & Play) feature.
PCI, or
P eripheral C omponent I nterconnect, is a system which allows I/O devices to
operate at speeds nearing the speed the CPU itself uses when communicating with
its special components. This section covers some very technical items and it is
strongly recommended that only experienced users should make any changes to the
default settings.
Graphic Adapter Priority
This setting specifies which VGA card is your primary graphics adapter. Setting
options are:
[IGD] The system initializes the IGD (internal graphic display) first. (for
915G only)
[PEG/IGD] The system initializes the PEG (PCI Express graphic) first. If a PCI
Express graphic card is not available, it will initialize the IGD. (for
915G only)
[PEG/PCI] The system initializes the PEG (PCI Express graphic) first. If a PCI
Express graphic card is not available, it will initialize the PCI graphic
card.
[PCI/PEG] The system initializes the PCI graphic card first. If a PCI graphic card
is not available, it will initialize the PEG (PCI Express graphic) card.
[PCI/IGD] The system initializes the PCI graphic card first. If a PCI graphic card
is not available, it will initialize the IGD. (for 915G only)