MSI 780GT-E63 Series Manual Download Page 49

BIOS Setup

MS-7551

3-13

BIOS Setup

MS-7551

p

ower

 M

anageMent

 S

etup

Important

S3-related functons descrbed n ths secton are avalable only when your BIOS sup-

ports S3 sleep mode.

ACPI Functon

Ths tem s to actvate the ACPI (Advanced Configuraton and Power Management In-

terface) Functon. If your operatng system s ACPI-aware, such as Wndows 2000/XP, 

select [Enabled]. 

ACPI Standby State

Ths tem specfies the power savng modes for ACPI functon. If your operatng system 

supports ACPI, such as Wndows 2000/ XP , you can choose to enter the Standby mode 

n S1(POS) or S3(STR) fashon through the settng of ths field.  Settngs are:

[S1]   

The S1 sleep mode s a low power state. In ths state, no system 

context s lost (CPU or chpset) and hardware mantans all system 

context.

[S3]    

The S3 sleep mode s a lower power state where the n formaton of 

system configuraton and open applcatons/files s saved to man 

memory that remans powered whle most other hardware compo-

nents turn off to save energy. The nformaton stored n memory wll 

be used to restore the system when a “wake up” event occurs.

Power Button Functon

Ths feature sets the functon of the power button. Settngs are:

[Power Off] 

The power button functons as normal power off button.

[Suspend] 

When you press the power button, the computer enters the sus-

Summary of Contents for 780GT-E63 Series











































































































Reviews: