CHAPTER 2
HARDWARE INSTALLATION
2-20
Wake-Up on LAN Connector: JWOL1
The JWOL1 connector is use for LAN add-on cards that supports Wake Up
on LAN function. To use this function, set the “Wake Up on LAN/Ring” to
enable located at the BIOS Power Management Setup.
PIN
SIGNAL
1
5VSB
2
GND
3
MP_WAKEUP
Note: LAN wake-up signal is active “high”.
Note:
To be able to use this function, you need a power supply that
provide enough power for this feature. (Power supply with 750mA
5V Stand-by)
JWOL1
1
3
