This is what you see when you open the set.
1. The head assembly of the flashlight is something you should never take apart or
attempt to modify, if you wish to keep the warranty valid.
2. This is the Barrel or LED Assembly which also should not be fiddled with, in the
interests of the stability of the flashlight and the validity of its warranty.
3. This is the Lip Seal, also known as the O-Ring.
4. This is the Switch Assembly, which is also known as the Tailcap, and should also
not be experimented with or taken apart for safety reasons and in the interests
of the warranty.
5. This is the plastic battery sleeve.
How do you start using your flashlight?
It’s easy. First of all remove the Tailcap, turning it counter clockwise.
Then insert one Battery – a 18650 Lithium-ion battery does the trick.
The battery’s “+” end should go first. Remember that the
batteries must be fully charged before you insert them, and
the charging can take about three to four hours.
Now you can reattach the Tailcap.
Your flashlight is ready to be tested.
You will find the switch button at the end of the Tailcap.
It looks like this
Press it. And.... let there be light!
|
5
|
User manual guide booklet.indd 5
2/21/2017 17:06:43