SS-110 Page, SS-110B & SS-
Q-6
OWNER’S MANUAL
© 2021 MSE Audio. Rev. 02.25.2021
360º of the Best Sound Around™
Contact: MSE Audio, 855.663.5600 / 913.663.5600 / [email protected]
TX-30 Transformer Installation Instructions
The TX-30 is designed for use with the Model 110B or Q-6
loudspeakers. Power taps are provided for 100V, 70V, and 25V
systems:
25V
70V
100V
White
30 Watts
---
---
Orange
15 Watts
---
---
Yellow
7.5 Watts
---
---
Brown
3.8 Watts
30 Watts
---
Blue
1.9 Watts
15 Watts
30 Watts
Violet
0.9 Watts
7.5 Watts
15 Watts
Green
0.5 Watts
3.8 Watts
7.5 Watts
Black
Common
Common
Common
Remember to clip and insulate unused input wires; shorting any
input wire to another will reduce the volume level and place an
unexpected load on the power amplifier.
When ordered with the Model 110B or Q-6, the TX-30 is mounted
to the back of the reflector and the loudspeaker driver connec-
tions are made at the factory.
Use either black wire for input common or driver (-) connections.
Notes:
- Red or Red with White stripe is 4 ohm tap.
- The total tap wattages should not exceed the amplifier’s
capability.
Other System
Model 110B
or
Model Q-6
Loudspeakers
AMPLIFIER (+)
AMPLIFIER (-)
SOUNDSPHERE MODEL 110B OR MODEL
Q-6 LOUDSPEAKERS
RED (+)
RED (+)
BLACK (-)
TX-30
USE EITHER
BLACK WIRE
SELECTED INPUT TAP
COLOR (FROM TABLE)
TX-60 Transformer Installation Instructions
The TX-60 is designed for use with the Model 110 Page
loudspeaker. Power taps are provided for 70V and 100V sys
tems:
70V
100V
Orange
60 Watts
---
Yellow
30 Watts
60 Watts
White
15 Watts
30 Watts
Green
Common
Common
OTHER SYSTEM
LOUDSPEAKERS
AMPLIFIER (+)
AMPLIFIER (-)
RED (+)
RED (+)
BLACK (-)
TX-60
GREEN WIRE IS
INPUT COMMON
SELECTED INPUT TAP
COLOR (FROM TABLE)
BLACK (-)
Remember to clip and insulate unused input wires; shorting any
input wire to another will reduce the volume level and place an
unexpected load on the power amplifier.
Notes:
- Red or Red with White stripe is 4 ohm tap.
- The total tap wattages should not exceed the amplifier’s
capability.
