INSTALLATION INSTRUCTIONS
5
PRO-DATA+ PROGRAMMING INSTRUCTIONS
Installing the Software
1. Insert the installation CD.
2. In Windows click
Start
then select
Run
.
3. In the box type
A:\Setup
then press
Enter.
4. Follow the on-screen instructions.
5. At this point there should be two MSD icons on your desktop.
6. Select the one that says
MSD Graph View
.
7. In the upper left corner of the screen select
File
.
8. Select the folder
7559
.
9. Select the file that says
7559vXX.IGN
(XX means the latest version such as 02).
10. Click on Open.
Saves and Transfers
Whenever a change is made to a program it either must be saved to your PC as part of the file you
are programming or it must be Saved/Transferred to the MSD Controller. The software gives you the
choice of automatically transferring the change to the MSD or the PC.
Save to MSD:
By saving the change right to the MSD, the new change is automatically put into the
Controller.
Save to PC:
This saves the changes on your PC screen only. The information still must be transferred
to the MSD before it becomes active or saved to a file.
Tachometer
The tachometer on the monitor will show real time rpm when the engine is running with the laptop
connected.
MENUS
Monitor Status
Cyl Cnt Shift*
Stat 1 Scan
ScanTime 1Sec
1 TO 9
ScanTime 1SEC
Rpm 12500
S
H
Cylcnt 8
4,6,8
ShiftGears
ShiftRpm
*
LastGear6
Inhibit 300ms
*
300 TO 600
GearSel1
Rpm 12500
1000 TO 12,500
Launch Alerts*
AlertsPer
LaunchRst
2 TO 6
Gearsolenoid
PulseTime
*
Gearsolenoid
Out_SeqOn
Out_SeqOn
Out_Pulse
PulseTime
Sec#.#
0.10 Sec to 2.50 Sec
Sw_Gnd
Sw_Gnd
Sw_Pwr
Alerts
2 Out1
3 Out2
4 Out3
5 Out4
6 Out5
Monitor List
1 ScanTime 1Sec
2 ShiftLt OFF
3 Rpm 12500
4 Gear 1
5 LaunchRst OFF
6 OverRide OFF
Stats List
Same as Monitor
list at left
Figure 5 Monitor Screen Menu.
