ENGL
ISH
MSC
Pro-Source
Man. cod. B411107FG
17
MODIFY AND CUT
7.4.0
Modify menu
The MODIFY menu is used to modify the cut parameters for a key
and it also makes it possible to personalise some characteristics
of the key, according to the client's specific requirements.
How to proceed:
• From the key search sub-menu, select “
”.
• This displays the technical sheet for the selected article and
makes it possible to change some of the key characteristics.
Options displayed:
1.
With this button is possible to decode the key using the se-
lected key system.
2. With this button is possible to insert the cuts directly.
3. With the Cut Type button is possible to select between the
possible cut types for the selected key. For edge cut keys cut
types are: Normal, Laser and Plane.
4. With the left arrow button is possible to scroll the spaces
moving to left direction.
5. With the right arrow button is possible to scroll the spaces
moving to right direction.
6. With the minus button is possible to decrement the depth of
the highlighted tooth.
7.
With the plus button is possible to increment the depth of the
highlighted tooth.
8. This makes it possible to select the depth increase or de-
crease rate when the + or - buttons are pressed. The availa-
ble options are: one STEP is either 0.1 mm or 0.01 mm or 1/2
step.
9. With this button is possible to reset the modifications made
on the selected tooth.
10. With this button is possible to modify simultaneously all the
teeth.
• For further information select “
” from the display.
Note:
The “
” symbol makes it possible to save the selected
key in the list of bookmarks. See paragraph 6.2.0.
Warning:
Important!
It is not possible to cut and decode painted keys or key
made of non-conductive material.
7.5.0
Key cut menu
Once the key to be copied has been searched using the relevant
functions in the database menu, the programme will direct the
user to the CUT screen, that makes it possible to duplicate the
desired key.
Note:
If the key has a shoulder stop, insert it in the clamp with
the special magnetic catch as shown in the console.
Options displayed:
1.
With this button is possible to set the amount of copies that
need to be cut.
2. With this button is possible to save the key.
3. Starts the key cutting process.
4. With this button is possible to change the default material.
The selectable material are: BRASS, ALUMINIUM, STEEL,
SILVER NICKEL, CUSTOM. Each material has a dedicated set
of parameters for the movement speed and cutter speed for
optimizing the quality of the cut and ensure the life of the
cutter. The custom material can be customized on the Pa-
rameters menu of the Setup menu.
5. With this button is possible to select the Jaw that has to be
used to cut the key, only compatible Jaws will be selectable.
6. Shows the reference of the cutter to be used.
7.
Suggests the position of the key in the jaw.
• For further information select “
” from the display.
Warning:
Important!
It is not possible to cut and decode painted keys or key
made of non-conductive material.
3
4
5
6
7
8
9
10
1
2
3
1
2
4
5
6
7
Summary of Contents for Pro-Source
Page 2: ......
