General Notice
OI: IPC370T
- II -
Rev. 1.00 dated 1.7.2004
Qualification of personnel
Only qualified personnel may carry out the following activities on devices of the
"IPC & PC-based Control" series: installation, commissioning, operation, maintenance.
Qualified persons in accordance with the safety guidelines are defined as persons who are
authorized to commission, to ground, and to tag circuits, equipment, and systems in accordance
with established safety practices and standards.
Disclaimer of liability
We have checked the contents of this document for agreement with the hardware and software
described. Since deviations cannot be precluded entirely, we cannot guarantee full agreement.
However, the data in this manual are reviewed regularly and any necessary corrections included
in subsequent editions. Suggestions for improvement are welcomed.
EEC directive EMC 89/336/EEC
The following applies to devices of the "IPC & PC-based Control" series of MSC Tuttlingen GmbH:
Products which carry the CE symbol meet the requirements of the EEC directive
89/336/EEC on electromagnetic compatibility.
The EEC declarations of conformity and the related documentation will be maintained at the
following address for inspection by the responsible officials in accordance with article 10(1)
of the above stated EEC directive:
MSC Tuttlingen GmbH
Rudolf-Diesel-Straße 17
78532 Tuttlingen
Germany
Areas of use
Devices of the "IPC & PC-based Control" series of MSC Tuttlingen GmbH meet the applicable,
harmonized, European standards for the respective area of applications.
Fitting conditions
The fitting conditions and safety notes in the operating instructions must be adhered to when
commissioning and operating the devices.
Trademarks
Intel, Pentium und Celeron are registered trademarks of Intel Corporation, USA.
Microsoft, MS, MS-DOS and Windows are registered trademarks of Microsoft Corporation.
PS/2 is registered trademark of International Business Machines, Inc.
The remaining trademarks in this publication may be trademarks, whose use by third parties for
their own purposes could violate the rights of the owner.
Copyright
These operating instructions are intended for the operator and the operator’s personnel only.
The transmission and reproduction of this document and the exploitation and communication of
its contents are not allowed without express authority. Offenders will be liable for damages.
Summary of Contents for IPC370T
Page 2: ......
