MSC 96M5985o, User Manual

Page: 46 / 69

BIOS SETUP
42
96M5985o User’s Manual
LCD Control
Aptio Setup Utility
Main Advanced
Chipset
Boot Security Save & Exit
LCD Control
→ ←
Select Screen
↑↓
Select Item
Enter: Select
+- Change Field
F1: General Help
F2: Previous Values
F3: Optimized Default
F4: Save & Exit
ESC: Exit
Primary IGFX Boot Display VBIOS Default
Active LFP No LVDS
Panel Color Depth 18 Bit
LCD Panel Type 1024x768 LVDS
SDVO-LFP Panel Type VBIOS Default
Panel Scaling Auto
Spread Spectrum clock Chip Off
TV1 Standard VBIOS Default
TV2 Standard VBIOS Default
ALS Support Enabled
Primary IGFX Boot Display
Select the Video Device which will be activated during PoST. This has
no effect if external graphics presenet.
Secondary boot display selection will appear based on your selection.
VGA modes will be supported only on primary display.
Active LFP
Select the Active LFP Configuration.
No LVDS: VBIOS does not enable LVDS.
Int-LVDS: VBIOS enables LVDS driver by Integrated encoder.
SDVO LVDS: VBIOS enables LVDS driver by SDVO encoder.
eDP Port-A: LFP Driven by Int-DisplayPort encoder from Port-A.
Panel Color Depth
Select the LFP Panel Color Depth: 18 Bit, 24 Bit.
LCD Panel Type
Select LCD panel used by Internal Graphics Device by selecting the
appropriate setup item: 640x480 LVDS ~ 2048x1536 LVDS.
SDVO-LFP Panel Type
Select SDVO panel used by Internal Graphics Device by selecting the
appropriate setup item: VBIOS Default, 1024x768 ~ 1600x1200.
Panel Scaling
Select the LCD panel scaling option used by the Internal Graphics
Device: Auto, Off, Force Scaling.