Input
switching
Manual with smart
• Only allows manual switching between active and
previously active inputs. The ‘Auto’ mode is not available.
Auto with smart (Default)
• Allows manual and auto switching between active and
previously active inputs.
Auto with all inputs
• Allows manual and auto switching between all installed
inputs.
Restore
DAC
settings
Confirm
• This restores the DAC to default settings.
Renderer
Remote
Enable
• The transport buttons on the remote work to control
renderer functionality
Disable
• The transport buttons on the remote only work for
the transport
Analog
Off (Default)
• Disables the analog input.
On-Volume Controlled
• Enables the analog input and uses the volume control.
On-Volume Bypass
• Enables the analog input and bypasses the volume
control.
About
screen
This screen displays the serial number, year of
manufacture, and distributor name of the DAC.
DAC
Software
This screen displays the current revision # of firmware
installed in the DAC.
Input A - D Lists the installed input module in slot A, B, C, and D.
If a Network Renderer is installed this screen will display
the currently used Network IP address of the module.
Output Displays the current output module installed and the
output impedance.
Setup Menu Continued...
