Loading new firmware
Always be certain that you are updated with the current firmware by
checking our website. The DACs’ firmware is always updated using a
.WAV file. If you experience issues with playback of the update file, be
sure to check for bit-perfect playback in your system.
All firmware updates can be found at:
www.msbtechnology.com/Support
Bit-Perfect Source Testing
The following files can be downloaded from the MSB website to verify
bit-perfect playback on any transport:
16 bit x 44.1 kHz sample rate file. 24 bit x 44.1 kHz sample rate file.
16 bit x 48 kHz sample rate file. 24 bit x 48 kHz sample rate file.
16 bit x 88.2 kHz sample rate file. 24 bit x 88.2 kHz sample rate file.
16 bit x 96 kHz sample rate file. 24 bit x 96 kHz sample rate file.
16 bit x 176.4 kHz sample rate file. 24 bit x 176.4 kHz sample rate file.
16 bit x 192 kHz sample rate file. 24 bit x 192 kHz sample rate file.
They are .WAV test files that when played, will be identified by the
DAC and checked, and will be reported on the display if they are bit-
perfect. If there is a problem with the test, it will play but the display
will not indicate any change. Be sure up-sampling is turned off in
any transport as this prevents a file from remaining bit-perfect. This
system will allow you to easily test your source, especially computer
sources, to see if all your settings are correct. There are files at all
sample rates for both 16 bit and 24 bit operation.
Summary of Contents for The Discrete DAC
Page 2: ......
