MSB Technology DVD Audio Player User Manual Download Page 16

16

10 CHP - Indicates that the character display is showing a DVD chapter number

11 REMAIN - Lights when the character display is showing the time or number of tracks/titles/

chapters remaining

12 Character display

13 II - Lights when a disc is paused

14 (arrow right) - Lights when a disc is playing

15 DD - Lights when a Dolby Digital soundtrack is playing

16 DTS - Lights when a DTS soundtrack is playing

Remote controls

Simple Volume Remote

The Simple MSB remote contains two functions.  The top bank of 4 buttons exactly duplicate the
function of the equivalent buttons on the front panel of the Player and control volume functions.    The
lower bank of buttons control the basic functions of Player, including Stop, Play/Pause, FORWARD
SCAN and REVERSE SCAN.  The buttons are all available on the front panel and the more complex
remote..  Batteries are not shipped in the remote.  Two AAA batteries are required.

Complete Remote

1

(STANDBY/ON) - Press to switch the player on or into standby

2

DISPLAY - Press to display information about the disc playing (page 51)

3

AUDIO - Press to select the audio channel or language (pages 49-50)

4

SETUP - Press to display (or exit) the on-screen display

5

ENTER & Joystick - Use to navigate on-screen displays and menus. Press ENTER to select an
option or execute a command

6

(RETURN) - Press to return to a previous menu screen

7

V.ADJ (VIDEO ADJUST) - Press to display the Video Adjust menu (pages 56-57)

8

(square) - Press to stop the disc (you can resume playback by pressing (right arrow) (play)

9

(right arrow) - Press to start or resume playback

10 (picture of arrows) - Press to jump to the start of the previous/next chapter/track

11 PLAY MODE - Press the display the Play Mode menu (You can also get to the Play Mode

menu by pressing SETUP and selecting Play Mode)

12 Number buttons

13 MENU - Press to display a DVD disc menu, or the Disc Navigator if a DVD-RW, CD, Video CD or MP3 disc is loaded

14 OPEN/CLOSE - Press to open or close the disc tray

15 ANGLE - Press to change the camera angle during DVD multi-angle scene playback

16 SUBTITLE - Press to select a subtitle display

17 TOP MENU - Press to display the top menu of a DVD disc

18 MULTI DIAL - Use for scanning and slow motion control

19 Jog indicator - Lights when multi dial is in jog mode

20 JOG (JOG MODE) - Press to put switch jog mode on/off. When on, use the

MULTI DIAL to advance or reverse frames

21 FL (DIMMER) - Press to change the display brightness

22 II - Press to pause playback; press again to restart

23 (left arrows) and (left & right arrows) and II (right arrow)/I (right

arrow) - Use for reverse/forward slow motion playback, frame
reverse/advance and reverse/forward scanning.

24 SURROUND - Press to activate/switch off (picture of arrows) V/

TruSurround

Summary of Contents for DVD Audio Player










































Reviews: