background image

 

 

 

MSA 

Permanent Instrument Warranty 

 

1. Warranty- 

Seller warrants that this product 

will be free from mechanical defect or faulty 
workmanship for a period of eighteen (18) 
months from date of shipment or one (1) year 
from installation, whichever occurs first, 
provided it is maintained and used in 
accordance with Seller’s instructions and/or 
recommendations. This warranty does not 
apply to expendable or consumable parts 
whose normal life expectancy is less than one 
(1) year such as, but not limited to, non-
rechargeable batteries, filament units, filter, 
lamps, fuses etc. The Seller shall be released 
from all obligations under this warranty in the 
event repairs or modifications are made by 
persons other than its own or authorized 
service personnel or if the warranty claim 
results from physical abuse or misuse of the 
product. No agent, employee or representative 
of the Seller has any authority to bind the 
Seller to any affirmation, representation or 
warranty concerning the product. Seller makes 
no warranty concerning components or 
accessories not manufactured by the Seller, 
but will pass on to the Purchaser all warranties 
of manufacturers of such components. 

THIS 

WARRANTY IS IN LIEU OF ALL OTHER 
WARRANTIES, EXPRESSED, IMPLIED OR 
STATUTORY, AND IS STRICTLY LIMITED 
TO THE TERMS HEREOF. SELLER 

SPECIFICALLY DISCLAIMS ANY 
WARRANTY OF MERCHANTABILITY OR OF 
FITNESS FOR A PARTICULAR PURPOSE.

 

 

2. Exclusive Remedy-

 It is expressly agreed 

that Purchaser’s sole and exclusive remedy for 
breach of the above warranty, for any tortious 
conduct of Seller, or for any other cause of 
action, shall be the repair and/or replacement 
at Seller’s option, of any equipment or parts 
thereof, which after examination by Seller is 
proven to be defective. Replacement 
equipment and/or parts will be provided at no 
cost to Purchaser, F.O.B. Seller’s Plant. 
Failure of Seller to successfully repair any 
nonconforming product shall not cause the 
remedy established hereby to fail of its 
essential purpose. 
 

3. Exclusion of Consequential Damage- 

Purchaser specifically understands and agrees 
that under no circumstances will seller be liable 
to purchaser for economic, special, incidental 
or consequential damages or losses of any 
kind whatsoever, including but not limited to, 
loss of anticipated profits and any other loss 
caused by reason of non operation of the 
goods. This exclusion is applicable to claims 
for breach of warranty, tortuous conduct or any 
other cause of action against seller. 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 

Summary of Contents for ZGARD DS





































Reviews: