GB
Order No.: 10071393/0
1
Donning the Protective Suit
When donning the protective suit a second person
(assistant) is required to help.
Donning Respiratory Protective Mask and adjusting
Head Strap
Donning the boots
(1) Step into the suit.
(2) Step into the right, followed by the left, boot.
Attaching the Support Belt
(3) Attach the support belt to the waist belt of the compressed
air breathing apparatus.
(4) Adjust the length of the support belt.
Pulling the Left Glove over Fully
(5) The assistant pulls the sleeve without creases to the side.
(6) Pull left sleeve on fully.
Pulling the Protective Suit on
(8) The assistant raises the protective suit over the
compressed air cylinders.
(9) Hold the lens up by the bottom edge using your left hand.
(10) The assistant places the head part over the helmet.
(11) If available, fit and connect the radio.
Pulling the Right Glove over Fully
(12) The assistant pulls the sleeve without creases to the side.
(13) Pull right sleeve on fully.
Closing the Protective Suit
(14) Keep the zip freely accessible and tight for closing.
(15) The assistant
gently
closes the zip in stages until reaching
chest height.
(16) The assistant connects the lung governed demand valve.
(17) The assistant
gently
fully closes the zip in stages.
(18) Close the push buttons on the zip cover.
