Things to Consider
• Use two people for alignment, one at Source and one at Receiver
• Automatic gain control compensates for dirty optics, rain, and fog
• Source and Receiver should not be mounted close to radio
sources or similar equipment
• Mount away from sources of excessive vibration and high
voltage/high current power lines
• If the path length is less than 20 meters (65 feet), a Source with
an attenuation plate is required
• A Long Range Alignment Kit is recommended for separations
of 60 meters or more
• If using adjacent detectors, install Receivers at opposite ends
to prevent light interference measurement errors
• Field calibration is not required and the sensitivity can be
checked by placing a test gas film in front of the Receiver
Specification
Ultima OPIR-5
RESPONSE TIME (T90, S)
≤3
REPEATABILITY
<±5%
LINEARITY
<±5% FS or ±10% Applied Gas
PATH LENGTH, MAX (M)
30 (short), 100 (
standard)
OPERATING TEMPERATURE
RANGE ( °C)
-55 to +65
SOLAR BLIND
All conditions
FOG IMMUNITY BASED ON FM 6325
95% blockage
COMBINED WEIGHT, RECEIVER
AND SOURCE (KG)
11 (SS only)
SUPPLY POWER, NOMINAL (W)
23
BIDIRECTIONAL COMMUNICATION
HART, Modbus
EVENT LOGGING/AMS
DEVICE MANAGER
Available
TWO AVAILABLE SCALES
LIGHT HYDROCARBONS
HEAVY HYDROCARBONS
0-5000 ppm*m & 0-5 LEL*m
0-2000 ppm*m & 0-1 LEL*m
Typical AJ Values
Distance
20 m
50 m
100 m
STANDARD
50-60
40-50
25-35
EXTENDED
N/A
45-55
30-40
CLEAR • MEASURE • SOURCE • RECEIVER
• Ensure the path is
CLEAR
between the Source and Receiver.
•
MEASURE
the distance between the Source and Receiver
to get the best AJ Values
• Start the Alignment at the
SOURCE
• Finalize the setup at the
RECEIVER
0
4
12
AO (mA)
5 LEL•m
5,000 ppm•m (0.1 LEL•m)
M
ethane G
as C
onc
entration
(ppm•m)
M
ethane G
as C
onc
entration
(LEL•m)
20
www.MSA
gasdetection
.com
Note:
This bulletin contains only a general description of the products shown.
While uses and performance capabilities are described, under no circumstances
shall the products be used by untrained or unqualified individuals and not until
the product instructions including any warnings or cautions provided have
been thoroughly read and understood. Only they contain the
complete and detailed information concerning proper use and
care of these products.
ID 0782-010-MC
e
/
Mar 2017
© MSA 2015 Printed in U.S.A.
MSA – The Safety Company
1000 Cranberry Woods Drive,
Cranberry Township, PA 16066 USA
Phone 724-776-8600
www.MSAsafety.com
U.S. Customer Service Center
Phone 1-800-MSA-2222
Fax 1-800-967-0398
MSA Canada
Phone 1-800-672-2222
Fax 1-800-967-0398
MSA Mexico
Phone 01 800 672 7222
Fax 52-44 2227 3943
MSA International
Phone 724-776-8626
Toll Free 1-800-672-7777
Fax 724-741-1553
Email [email protected]
Source
Receiver
50 to 1
0
0m
