MSA SUPREMATouch MCP 20, Operating Manual

Page: 52 / 241

52
Entering System Parameters
GB
SUPREMATouch
Gas Names
Fig. 32 Gas names
Use this window to view the provided protected gas names and to adjust some predefined
changeable gas names.
User defined texts can be entered. Identical names are not allowed and will be rejected with the
message
Error: Name not unique!
.
Field Field Type Function
Sensor Selection
The head, on which status texts should be put or for which it
should be changed can be selected with this field.
Status (Status
of this data
cell)
Display
This field displays the status of the cell used for data saving. If
this status is
protected , then data cannot be changed and the
following input fields are display-only fields.
Status text
Text, 8 char-
acters
Texts displayed in the measuring value lists can be entered
here. This text will be displayed if the measured value lies within
the specified signal range.
Range
Number input
This signal
range can be
set in a range
from 0–400.
Lower and Upper limits of respective signal range. This is a
display-only field if the status for this sensor is
protected .
OK Button
By tapping this button, the completed settings are applied to the
selected head.
Cancel Button
By tapping this button, the completed settings of the selected
head are cancelled.
Field Field Type Function
ID (ID of this
gas name)
Selection A gas name can be selected by its ID.
Status (Status
of this data
cell)
Display
Displays the status of the cell used for data saving.
If status is
protected , then data cannot be changed and the
following input fields are display-only fields.
Name
(English) Text, 20 char-
acters
The English gas name can be entered here.
Name (local)
Text, 20 char-
acters
The gas name in local language can be entered here.