5). Zero and SPAN calibration can be performed using the optional Calibration Cap or via the HART interface as
described in the instruction manual.
ID 07-20118-MC / May 2013
Rev. 2 118 10117717
© MSA 2013 Printed in U.S.A.
View complete product literature on the enclosed CD or visit MSAsafety.com
4). Using a high quality power supply, apply 18-32 VDC as measured at the sensor. Wait 60 minutes before calibrating.
CALIBRATION
OR
HART Box
Do not install sensor in direct sunlight without use of a sunshield
(see Accessories section of the instruction manual).
