(8)
Carefully clean the breathing tube connection and cartridge ports to remove deposits that could prevent an airtight seal.
WARNING!
DO NOT submerge the blower assembly.
Failure to follow this warning can result in serious personal injury or death.
(9)
Thoroughly wash and rinse the waist belt in the Confidence Plus or equivalent cleaning solution. A soft brush or sponge
may be used.
NOTE:
The comfort belt and shoulder strap are machine washable.
(10) Reassemble the respirator so that it will be ready for use.
6.2
Inspection
(1)
Inspect all hardware to ensure proper condition of threads, bayonet tabs, and buckles. Inspect the equipment for
damaged threads, cracked plastic or rubber parts, worn or frayed belts, or other damaged components.
(2)
Inspect all gaskets and seals and ensure that they are present and in good condition.
(3)
Inspect the blower assembly and breathing tube assembly for damage or cracks. Ensure that there are no loose objects
rattling inside the blower assembly.
(4)
Inspect the hood material for tears or holes. Inspect the suspension. Replacement sweatbands may be ordered in
packages of 10 (P/N 10083618).
(5)
Inspect the hose for tears or holes.
(6)
Correct any deficiencies immediately or tag the respirator as in need of repair and remove it from service.
(7)
Ensure that the unit is working properly before storage.
OptimAir TL PAPR
35
US
6 Cleaning and Inspection
Summary of Contents for OptimAir TL PAPR
Page 51: ...OptimAir TL PAPR 51 US...
Page 52: ...OptimAir TL PAPR 52 US...