8
Accessories
8.1
Installing the Nosecup for Ultravue / Ultra Elite Facepiece
(1)
Place the nosecup in the facepiece and position it so its rubber ring faces toward the plastic retainer ring.
(2)
Starting at the top, stretch and push the rubber ring of the nose-cup under the plastic
retainer ring of the speaking diaphragm assembly.
(3)
Continue stretching the nose-cup ring and work it into place.
NOTE:
For Ultra Elite masks only, stretch the oval opening in the nose-cup around the
lip on its component housing.
8.2
Installing Nosecup for Advantage 3000 / 4000 Masks Only
(1)
Place nosecup into facepiece with notch of nose-cup facing the bottom of facepiece.
(2)
Place bottom of nosecup under facepiece seal.
(3)
Stretch nosecup over inhalation valve housing ensuring notch of nosecup is over tab of inhalation valve housing.
(4)
Stretch nosecup around lip on inhalation valve housing ensuring nosecup is in place.
8.3
Spectacle Kit
Spectacle kits are available for the Ultravue (P/N 454819), Ultra Elite (P/N 804638), Advantage 3000/4000 (P/N 10029298),
and G1 (P/N 10144230) Facepieces. The kit includes the support assembly, a rubber block, and the spectacle frame.
Prescription lenses can be obtained locally or through MSA.
8.4
Adjusting the Spectacles
(1)
To move the spectacles closer to your face, pull the frame prongs out of the rubber block.
(2)
To move the spectacles farther from your face, push the frame prongs into the rubber block.
(3)
To move the spectacles up or down, slide the rubber block up or down on the support
arms.
8.5
Installing the G1 Spectacle Kit
WARNING!
Before using a spectacle kit, an optometrist must examine the spectacle kit and prescribe the correct lenses to fit into the lens
frame on the spectacle kit.
OptimAir® MM PAPR
27
US
8 Accessories
