4
EN
MSA Latchways
®
Leading Edge SRL
User Instructions
*Date of first use shall be administratively provable. Where the date of first use is unknown, then the next previous
administratively provable date shall be used, e.g. date of purchase or date of manufacture.
1. Type A edge: A steel edge with a radius of r = 0.5 mm and without burrs was used for the test. This is similar in
nature to rolled steel profiles, wooden beams or clad, rounded roof parapets.
The Latchways Leading Edge SRL, in accordance with EN 360:2002 and VG11
standards, is intended to be used as a connecting element within a personal fall
arrest system. It should be typically used vertically in situations where User mobility is
required and fall protection is needed. It may also be used horizontally, as indicated in
these instructions. Latchways Leading Edge SRL has been tested for horizontal use
and a drop over a
Type A edge
1
has been successfully tested.
As per UK HSE Guidelines the Latchways Leading Edge SRL shall not be used
within the UK.
Date of first use:
(page 3)
The date the unit is removed from the packaging.
1 General information
Failure to follow these instructions may cause serious injury or death. Instructions shall
be retained and provided to all Users of Latchways Leading Edge SRL in the language
of the destination country, even when resold.
A declaration of conformity may be downloaded at
www.latchways.com/declaration_of_conformity_627
Warranty details
Full terms and conditions can be found at
www.latchways.com/warranty.
2 Product Markings
1
Model number
7
Applicable standard
2
Serial number
8
Do not use
3
Date of manufacture MM/YY
9
Product limitations
4
Length
10
Product warning
5
Load-indicator
11
Pre-use checks
6
Notified body number
12
Date of next examination
3 Intended use and product limitations
The Latchways Leading Edge SRL is designed for applications where falls may occur
over edges, such as roofing, leading edge construction etc.
The Latchways Leading Edge SRL shall only be used within it’s limitations and for the
purpose for which it is intended. All instructions shall be followed to ensure the safety
of the User. Authorised repairs are to be conducted by a Technician.