3
Version 10.6.3
Operating Manual
INTRODUCTION
This operating manual (hereinafter referred to as OM) is intended to describe
Marine automatic telephone system ITS-1004 (hereinafter - the System).
OM describes the structure, operating principles, operating rules for the System
components (hereinafter – the SC) during intended use and technical maintenance. OM
may also provide information for corresponding sections of the System operational
documentation, where SC may be applied as units composing the System.
In addition to the instructions given in this document, the safety regulations and
rules applicable in the field shall be observed. Only those who have read and understood
this document and those who have had special training shall be permitted to operate with
the System according to the applicable regulations.
Equipment defects occurred due to non-observance of the current OM shall not
be cause for reclamations to the Manufacturer.
Terms and abbreviations
:
DECT – digital wireless communication;
DTMF – dual-tone multi-frequency analog signal;
SB – storage battery;
UТ – user terminal;
ATX – automatic telephone exchange;
CID – automatic caller identifier (CallerID);
CM – console mounting;
LC – loudspeaker communication;
UTN – urban telephone network;
VAS – value added services;
LCD – liquid-crystal display;
SPTA – spare parts, tools and accessories;
CPAU – command public address unit;
HM – hinged mounting;
DM – desk-top mounting;
PU – priority user;
PC – personal computer;
S – software;
RTC – radio telephone communication;
SC
system components;
PSTN – public switched telephone network;
CU – central unit.
