US
MSA
DESCRIPTION
ALTAIR 5 - Operating Manual
17
To Charge the Instrument
•
Firmly insert the charger connector into the charge port on the back of
the instrument.
•
An LED in the battery pack is used to indicate on the charge status.
Red = charging, Green = charged, Amber = fault
•
If a problem is detected during charging (LED turns amber).
Disconnect the charger momentarily to reset the charge cycle.
2.3.4 Confirmation
Beep
This confirmation beep activates every 30 seconds by momentarily beeping
the horn and flashing the alarm LEDs under the following conditions:
•
Confirmation beep is enabled
•
Instrument is on normal Measure Gases page
•
Instrument is not in battery warning
•
Instrument is not in gas alarm.
2.4. Viewing Optional Displays
The Main Screen appears at instrument turn-ON.
Optional displays can be viewed by pressing the
button to move to the
screen as indicated by the "soft key".
(For the monochromatic display the name of the page is displayed, for the
color version it is represented by an icon.)
2.4.1 Peak Readings (PEAK page)
Monochromatic display
Color display
PEAK
This page shows the highest levels of gas recorded by the instrument since
turn-ON or since peak readings were reset.
To reset the peak readings:
(1) Access the PEAK page.
(2) Press
the
button.
2.4.2 Minimum Readings (MIN page)
Monochromatic display
Color display
MIN
This page shows the lowest level of oxygen recorded by the instrument
since turn-ON or since the MIN reading was reset.
To reset the MIN readings:
(1) Access the MIN page.
(2) Press
the
button.