MS SKY MASTER, User Manual

Page: 3 / 28

Unlock the drone
1. Turn on the remote control
2. Power on the drone and place it on a flat surface
3. Push the left stick up to top position then pull it down, a beep sounds and the LED stops flashing, the drone has
been unlocked
Gyroscope Calibration
After unlocking the drone, push both the left stick and right stick to the left (45
degree angle) at the same time, the calibration is successful once the lights stop
flashing.
Note: when the aircraft drifts any direction, and the trim-turning adjustment can
not play the role, this operation can repair it.
Taking off & Hover the drone
1. Unlock the drone as instructions above first -b. Push the left stick to left (45 degree angle) and right stick to right
(45 degree angle) at the same time, motors start rotating, ready to fly
2.
Push up the left stick, the drone takes off and ascends manually.
3. Or press the button ‘Take off’, the drone takes off and ascends automatically.
4. Release the throttle, the left stick backs to central position, and drone hovers automatically.
Landing the drone
Method 1: Pull down the left stick to bottom position, the drone descends and lands
manually.
Method 2: Press the button ‘Landing’, the drone descends, lands and stop motors
automatically.
Note: Before final landing to ground, the drone can still be flown up by pushing up the
throttle joystick.
Emergency stop
In case of that the motors are stuck by obstacles or danger happens to surrounders, press the button ‘Emergency
stop’ to stop the motors immediately to avoid further damage or injury.
Note: If it’s not necessary, please do not try this Emergency button to bring possible damage to the drone by violent
crashes.
1.Starting motors
2. Pushing up
1. Pushing down
Emergency
Stop
Take off
Landing