Battery Charger INTELLI 3
7
SETTINGS
1. Menu language:
• Connect the INTELLI 3 to a mains socket. The
version number is fi rst shown in the display, then
„M+S Solution INTELLI 3“.
• With the battery not connected, press the
button.
•
Press or till „Sprache/Language“ is displayed.
The second selectable language will be displayed.
•
Press to change the menu language between
„German“ and „English“.
• Wait for 10 seconds => automatically back to the
function display or select or to get to the next
menu option.
2. Type of battery:
Before connecting a battery, the battery type must be set.
• Connect the INTELLI 3 to a mains socket.
• With the battery not connected, press the
button.
•
Press or till „Change battery type“ and the
currently selected battery type are displayed
alternately.
•
Press to change the selection.
•
With or , select the desired type of battery:
lead/acid – lead/gel – AGM – pure lead –
LiFePo.
• Confi rm the selected battery type with
=> Back to the main menu
3. Power supply:
Select this menu if the vehicle should be supplied with
power at short notice during removal of the battery.
The set values of the vehicle are retained
(e.g. radio PIN code).
• With the battery not connected, press the
button.
•
Press or till „power supply“ appears.
The pre-set status will be displayed.
•
Press in order to switch „power supply” mode
on or off.
no battery
connected !
Choose menu item
exit
battery type:
Change
Sprache/Language
english
Lead/acid
Change
choose menu item
exit
Constantcurrent:
off