MS Schippers MS Pigsleeper Flexy, Assembly Instructions Manual

Page: 6 / 20

6
5. Place the crossbar on the middle beam of the trolley frame.
6. Then slide the side plate that you removed in step 2 back onto the frame.
Push it between the bar of the frame and the side of the crossbar.
Tip: First place the lock nut on the inside of the metal plate. Then screw the
M8 bolt in from the outside and fasten it.
7. Now that the crossbar is in place, it can be tightened on both sides at the
bottom with all 4 Allen screws.
Tighten the screws until the crossbar is firmly clamped to the frame.
See image at point 8 for a complete set-up.