MRV Communications LambdaDriver 400, User Manual

Page: 109 / 207

LambdaDriver 400 & 800
ML46430, Rev. 07
October 2004
Table 11: DIP Switch Setting of Transponder Module (Cont’d)
No. Control Transponder
Type
Protocol Data Rate
(Mbps)
Setting
18 DTV 372 to 520
19 FC; DS4C; OC-12 483 to 718
20 707 to 765
21 702 to 802
22 744 to 1040
23 FC; DS5; OC-24;
GE; DS-5X 965 to 1435
24 HDTV 1419 to 1529
25 1403 to 1604
26 1488 to 2070
27
High Speed
OC-48; FC2.128G 1930 to 2700
Toggle in ON position.
Toggle position immaterial.
TM-DXFP 10 Gbps Transponder Module
Configure each TM-DXFP Transponder module as follows:
1. With the aid of Figure 41 , locate Jumper JP6 on the TM-DXFP Transponder module and
position it using Table 14 .
Table 14: JP2 Jumper Positioning
Mode Jumper Position
LASER SD: Standard-compliant Protective
Automatic Laser Shutdown (ALS/APR) mode. In
this mode, the TM-DXFP Transponder transmits in
the access direction at a rate that is eye safe
so
long as it does not receive from the access
direction, and transmits in the WDM direction at a
rate that is eye safe
so long as it does not receive
from the WDM direction.
109