USER MANAUL
MGA
prime Q
MRU GmbH, D-74172 Neckarsulm
43 /
117
►
Press OK.
The analyser is reset to factory default
5.15.
Configuration of measurement program
The Analyser provides in the Measure menu various measurement
programs, which can be selected in the main window. Each measuring
program defines the properties of the measuring window:
5
Test program
The measured value window shows predefined values and cannot be
changed. Can be used in instrument testing to obtain standardized
displays, e.g. can easily be checked with test gases.
Measurement program
The measured value window can be freely set with regard to the
displayed measured values.
5
Conversions and references are not part of the proof according to 15267-4. See also
Chapter 2.1 Intended use, Page 8.
