mru AirFair OPTIMA 7 NDIR, User Manual

Page: 31 / 58

MRU GmbH USER MANUAL OPTIMA 7 - NDIR
31
•
External temperature sensors are not connected.
The measurement value T-Gas is usually read at the connector “T-Gas/AUX” (depending on con-
figuration) or if not available from the connector “T1”. (see chapter 6)
There are three measurement windows available, with the arrow keys left and right moving be-
tween them.
Zoom function, each with two values, is activated by moving the arrow keys up and down. Moving
arrow keys left and right pages between the two zoom windows.
12.3 Test program
This test program is made for testing facilities that will test these analysers with test gases and
don’t need to make any modifications.
In this program you will only see measured values and no calculated values at all.
Now you can change the current values and the values of the temporary buffer with the key
F3
. This change of the actual values with the values of the temporary buffer memory can be exe-
cuted several times one after the other
Now it is possible to print and save as usual one of both measurements.