USER MANUAL
400DH
12 / 14
MRU GmbH, D-74172 Neckarsulm
4.4.
Non-contact temperature measurement
The IR400 interchangeable sensor is used for non-contact temperature measure-
ment.
Aim the sensor at the surface to be measured. The measuring distance depends on
the size of the surface to be measured, the closer the measurement becomes, the
more accurate it becomes. The minimum distance is approx. 1 - 2 cm.
Functions in the Context menu:
function
explanation
Signal ON (Key F1)
With this function the signal is switched on.
Signal ON (Key F1)
With this function the signal is switched off.
Max = 0 (Key F3)
The value Max is set to zero.
Reset
This function resets the graphic.
Setting
Setting units and signal thresholds
Printout (Dr)
Printout is generated, a printer is required for this
function.
Meas. menu (ESC)
Exit measuring program
Info
The information (sensor name, page number, firmware
version) about the sensor is displayed here.
Settings:
Signal threshold
30 °C … 380 °C
units
° C, ° F
Technical Specification:
range
resolution
field of vision
Sensor IR400
-70 … +380 °C
0,1 °C
35°
