MRMC MRMC-2132-00, Quick Start Manual

Page: 7 / 16

Bloop Light Quick Start Guide
3
Connecting the cables
Configuration A: Connecting Directly to RT-14
In Flair, the button for Trigger 1 is labelled
Bloop
by default unless you
have changed it, as it is usually used to trigger the Bloop light. YYou can
change this name in Flair by using the same menu options that you use to
add triggers to a move:
Setups > Outputs > #1 - Bloop
,
#2
,
#3
, etc. See
the Flair documentation for details.
The Trigger 1 signal in Flair is same as Output 2 in 37-Way D-type
connector on RT-14.
XLR
Extension
cable
D-type to XLR
cable
RT-14 interface box
TRIGGERS
connector